Integrated Plant Protection (IPP)

What's Wrong With My Plant? The Grower's Choice Plant Guard Problem Guide

The 20 problems growers run into most: what you'll see, your Integrated Plant Protection step, and where Plant Guard fits. Some of them no spray can fix, and we'll tell you which ones.

Download the printable 2-page PDF

What is Integrated Plant Protection?

Integrated Plant Protection (IPP) means protecting every way problems get into your grow, every week, from seed to harvest, instead of waiting for spots and panicking. Most problems ride in on tools, hands, clones, water and the surfaces your plants touch. IPP closes those doors with one simple routine:

  1. Seeds and clones: start clean before anything comes inside.
  2. Your room: clean tables, benches, trays and walls between runs.
  3. Your tools: clean shears and sprayers between plants.
  4. Your water: clear slime from reservoirs and lines.
  5. Your plants: a routine spray from veg to harvest day.

Plant Guard helps works on the problem directly Part of your IPP not the fix, but part of the routine that prevents it Not a spray fix here's the real fix

Diseases

Powdery mildew

Plant Guard helps
What you'll see
White, flour-like spots on fan leaves that wipe off, then spread to sugar leaves and buds.
Your IPP step
Check leaf tops and undersides every week. Keep air moving and humidity steady. Spray on a routine from veg to harvest, not just when you see spots.
Where Plant Guard fits
Plant Guard is concentrated HOCl that works on powdery mildew spores on contact and leaves no oily film, so you can keep your routine going right up to harvest day.

Bud rot (botrytis, gray mold)

Plant Guard helps
What you'll see
Gray fuzz or brown, mushy spots inside dense colas, or a dead leaf poking out of a bud, often after rain or a humid stretch.
Your IPP step
Keep late-flower humidity down, open up dense colas, shake off rain, and mist early in the light cycle so buds dry fast. Cut out and bag any rotted bud.
Where Plant Guard fits
A routine mist works on the spores behind bud rot on the outside of your buds. It can't save a cola that's already rotting inside. Cut that out.

Root rot

Plant Guard helps
What you'll see
Brown, slimy roots, stunted growth, and plants that wilt even when the media is wet.
Your IPP step
Don't overwater, keep reservoirs cool, and clean reservoirs, lines and tubing between runs.
Where Plant Guard fits
Clean reservoirs, lines and tubing with Plant Guard at the Grower's Guide rates to clear slime and biofilm.

Damping-off

Plant Guard helps
What you'll see
Seedlings pinch at the soil line and fall over.
Your IPP step
Wash seeds, start with clean trays and domes, don't overwater seedlings, and keep a little air moving.
Where Plant Guard fits
Use Plant Guard as a seed wash and to clean trays and domes before you start.

"Dudding" (stunted, low-frost plants)

Plant Guard helps
What you'll see
Stunted plants, brittle stems, small loose buds and poor trichome production, often across clones from one mother.
Your IPP step
Clean shears between every plant. Start from clean, tested mothers and clones, and remove plants you suspect.
Where Plant Guard fits
Clean shears, trimmers and benches with Plant Guard between plants. Only a lab test of the mother confirms the cause.

Mold while drying

Plant Guard helps
What you'll see
A musty smell or fuzz on buds in the drying room.
Your IPP step
Dry cool and steady, space out the branches, and start the dry with clean buds.
Where Plant Guard fits
Use Plant Guard as a harvest bud wash to rinse off dust, pollen and spores, and to clean drying-room surfaces first.

Pests

Spider mites and russet mites

Part of your IPP
What you'll see
Tiny speckles on leaves, fine webbing, and leaves that turn dull or bronze.
Your IPP step
Mites feed on the plant and hitchhike in on new clones, clothes and tools, and spider mites boom in hot, dry rooms. Quarantine and inspect anything new, check leaf undersides weekly, keep clothes and tools clean between rooms, and keep humidity in range.
Where Plant Guard fits
Plant Guard isn't a mite product. Use it to clean tools, trays and surfaces as part of starting clean, and use a product made for mites on an active problem.

Thrips and aphids

Part of your IPP
What you'll see
Silver streaks and black specks (thrips), or clusters of small bugs and sticky leaves (aphids).
Your IPP step
Both feed on the plant's sap and ride in on new plants, clothes and tools. Inspect weekly, use sticky traps, and quarantine anything new before it comes inside.
Where Plant Guard fits
Plant Guard isn't a pest product. Use it to clean tools, trays and surfaces as part of starting clean, and use a product made for that pest on an active problem.

Fungus gnats

Plant Guard helps
What you'll see
Tiny black flies around the pots, and larvae in wet media.
Your IPP step
Gnat larvae feed on fungi, algae and decaying matter in wet media. Let the top of the media dry between waterings, use sticky traps, and clean slime out of trays and lines.
Where Plant Guard fits
Plant Guard clears the slime and biofilm in trays and lines where gnats like to breed. It isn't a gnat killer.

Environment

Humidity swings

Plant Guard helps
What you'll see
Mildew after muggy nights, or mold after a rainy week.
Your IPP step
Keep humidity steady, run a dehumidifier in flower, and watch your VPD.
Where Plant Guard fits
A routine spray means a muggy week has much less to work with.

Heat and light stress

Not a spray fix
What you'll see
Bleached or burnt tops, leaves cupping up, foxtailed buds.
Your IPP step
Raise the lights or lower the heat.
Where Plant Guard fits
No spray fixes this, including ours.

Poor airflow and dense canopy

Not a spray fix
What you'll see
Damp pockets in the middle of the plant, where mildew starts first.
Your IPP step
Defoliate, space plants out, and run fans above and below the canopy.
Where Plant Guard fits
Good airflow helps any spray reach every leaf. No spray replaces airflow.

Storms and outdoor weather

Plant Guard helps
What you'll see
Sudden mildew or mold after rain, fog or cold nights.
Your IPP step
Shake water off the plants, check the biggest colas the next day, and stay on your routine.
Where Plant Guard fits
Mist with Plant Guard once the plants can dry, and keep your twice-a-week routine going.

Water and nutrients

Overwatering

Part of your IPP
What you'll see
Droopy, heavy leaves, media that stays wet, and fungus gnats.
Your IPP step
Water when the pot feels light, not on a fixed schedule.
Where Plant Guard fits
Watering less is the fix. Plant Guard's part in your IPP: clean the trays, saucers and lines where overwatering leads to slime, gnats and root problems.

pH problems and nutrient lockout

Part of your IPP
What you'll see
Yellowing, spotting or curling, even though you're feeding. Often mistaken for disease.
Your IPP step
Check the pH of your water and runoff before you change anything else.
Where Plant Guard fits
Plant Guard is pH-neutral (6.5 to 7.0), so your IPP routine won't throw off your pH. Fix the pH first; it's not a spray fix.

Deficiency or nutrient burn

Part of your IPP
What you'll see
Yellow lower leaves (too little), or burnt tips and edges (too much).
Your IPP step
Adjust your feed to the plant's stage.
Where Plant Guard fits
Plant Guard isn't a fertilizer, so it won't fix a deficiency. It does break down to water and a trace of potassium salt, a nutrient plants use, so nothing it leaves behind works against your feed.

Slime in lines and reservoirs

Plant Guard helps
What you'll see
Clogged emitters, slimy reservoir walls, a sour smell.
Your IPP step
Clean lines, reservoirs and drip emitters between every run.
Where Plant Guard fits
Plant Guard clears slime and biofilm from lines, reservoirs and emitters at the Grower's Guide rates.

Plants and genetics

Clones that won't root or bring problems in

Plant Guard helps
What you'll see
Wilting cuttings, rotting stems, or bugs on new clones.
Your IPP step
Quarantine new clones, use clean cutting tools, and clean domes and trays.
Where Plant Guard fits
Treat new clones and clean your tools, domes and trays with Plant Guard before anything comes inside.

Hermaphrodites

Not a spray fix
What you'll see
Pollen sacs or "bananas" on female plants, seeds in the crop.
Your IPP step
Reduce stress (light leaks, heat swings), choose stable genetics, and pull affected plants.
Where Plant Guard fits
No spray fixes this.

Weak mother plants

Plant Guard helps
What you'll see
Each round of clones comes out weaker than the last.
Your IPP step
Refresh mothers regularly and make clean cuts.
Where Plant Guard fits
Clean cutting tools between mothers with Plant Guard.

This guide helps you spot common problems. It isn't a diagnosis. When you're not sure what you're looking at, compare a few leaves closely, check your pH and watering first, and test a few leaves before you spray a whole plant. Every mixing rate is in the Grower's Guide.

Clean Leaves. Clean Buds. From Seed to Harvest.

One fresh-made, concentrated HOCl for every step of your IPP routine.